Email Us
Water-proof Outdoor Ethernet Surge protector

Water-proof Outdoor Ethernet Surge protector

Techwin Industrial POE (Power over Ethernet) SPD (Surge Protection Device) is specially designed for Ethernet switches. The POE switch will not be damaged by lightning overvoltage, induced overvoltage, and electrostatic discharge.

  • CAT6, CAT5e and CAT5 compatible

  • IEEE 802.3af,803.1at

  • 10/100/1000 Base-T Gigabit Ethernet protection

  • LAN, FDDI, CDDI, ATM,WLAN

  • PDH, SDH, SPDH

  • Industrial control

  • Industrial POE, With High reliability and high stability

Surge protection for power supply system, SPD for low-voltage installations and device.CCTV system.


Features of Water-proof Outdoor Ethernet Surge Protector

  • Multi-protection circuits, Gas-Tube+ TVS technology

  • Dual protection in Common module and different module

  • TVS array technology, low capacitance

  • Multi-Strike Capability

 

 

Application of Water-proof Outdoor Ethernet Surge Protector

Designed for Ethernet device not to be spoiled by lightning over-voltage, induced over-voltage and static discharge.

  • CAT6, CAT5e and CAT5 compatible

  • 802.3af

  • 10/100/1000 Base-T Gigabit Ethernet protection

  • LAN, FDDI,CDDI, ATM,WLAN

  • PDH, SDH, SPDH

  • Industrial control


Specification of Water-proof Outdoor Ethernet Surge Protector


Model

POE5-48-OD

POE6-48-OD

Lightning projection zone(LPZ)

2

Standards Compliance

IEC61000,  EN60950,GB/T18802.21-2002,TB/T2311-2002

According to IEC61643

III

According to DIN VDE6075 Part6(Draft 11.89) A1,A2

D

Max continuous operating voltage Uc

68VDC

Nominal working voltage(Un)

48VDC

Nominal discharge current  (8/20µs)   In

5KA

Max discharge current Imax (8/21µs)   Imax

10KA

Voltage protection Level

@C2(8/20µs) Up

≤190V(L-L).≤500V(L-G)

Voltage protection Level

@C3(1kV/µs) Up

≤145V(L-L).≤600V(L-G)

Rated load current IL

200mA

Limiting Voltage(10/700µs)

≤20V

Cut-off Frequency  fG

250MHz

Response time tA (L-N/N-PE)

1ns

Protection line

1/2,3/6,4/5,7/8

Mounting

Be Installed between protected equipment and signal line

Adapt Transmission rate

     100/1000 Mbps

Transmission standards

100BaseT/ 1000BaseT/1000Base TX,CAT5/CAT6,POE

Dimension

78(H)×172(W)×159(L)m

Interface form

RJ45

IP code(IEC EN 60529)

IP65 (with waterproof duct tape applied on the cables at the entering joints)

Error rate

≤10-12

Material/color

Aluminum/Blue

Insertion loss

≤.0.1dB

Working conditions

Temperature: -40 to 85℃, Relative humidity: ≤95%


Related Products

Leave a Message
contact
Contact Us
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept