Power over Ethernet protector is designed for POE power supply equipment, are widely used in the areas of wireless coverage, security monitoring, etc. to protect the communication equipment's POE port line from the impact of lightning Electromagnetic pulse, lightning electromagnetic pulse, switching overvoltage.
Multi. Protection circuits, Gas-Tube+ TVS technology
Dual protection in Common module and different module
TVS array technology, low capacitance
Multi-Strike Capability
POE6-48 POE6-48-24 is designed for Ethernet device not to be spoiled by lightning over-voltage, induced over-voltage, and static discharge.
CAT6, CAT5e, and CAT5 compatible
802.3af
10/100/1000 Base-T Gigabit Ethernet protection
LAN, FDDI, CDDI, ATM, WLAN
PDH, SDH, SPDH
Industrial control
Model | POE6-48 | POE6-48-4 | POE6-48-8 | POE6-48-24 | ||
Lightning projection zone(LPZ) | 2 | |||||
Standards Compliance | IEC61000, EN60950, GB/T18802.21-2002, TB/T2311-2002 | |||||
According to IEC61643 | III | |||||
According to DIN VDE6075 Part6 (Draft 11.89) A1, A2 | D | |||||
Max continuous operating voltage Uc | 68VDC | |||||
Nominal working voltage(Un) | 48VDC | |||||
Nominal discharge current (8/20µs) In | 3KA | |||||
Max discharge current Imax (8/21µs) Imax | 5KA | |||||
Voltage protection Level @C2(8/20µs) Up | ≤190V(L-L)≤500V(L-G) | |||||
Voltage protection Level @C3(1kV/µs) Up | ≤145V(L-L)≤600V(L-G) | |||||
Rated load current IL | 200mA | |||||
Limiting Voltage (10/700µs) | ≤20V | |||||
Cut-off Frequency fG | 250MHz | |||||
Response time tA (L-N/N-PE) | 1ns | |||||
Protection line | 1/2, 3/6, 4/5, 7/8 | |||||
Mounting | Be Installed between protected equipment and signal line | |||||
Adapt Transmission rate | 1000Mbps | |||||
Transmission standards | 100BaseT/ 1000BaseT/1000Base TX, CAT5/CAT6, POE | |||||
Dimension | 104H)×58(W)×28(L)mm | 95 (H)×85(W)×48(L)mm | 190 (H)×85(W)×48(L)mm | 482 (H)×86(W)×44(L)mm | ||
Interface form | RJ45 | |||||
IP code(IEC EN 60529) | IP20 | |||||
Error rate | ≤10-12 | |||||
Material/color | Aluminum/Blue | |||||
Insertion loss | ≤0.1dB | |||||
Working conditions | Temperature: -40 to 85℃, Relative humidity: ≤95％ | |||||
EN
jp 
ko 
fr 
de 
es 
it 
ru 
pt 
ar 
vi 
th 
ro 
bg 
nl 
