EN
jp 
ko 
fr 
de 
es 
it 
ru 
pt 
ar 
vi 
th 
ro 
bg 
nl MDI surge protector is designed for HD networking camera with PTZ control, protecting power & network line from lightning electromagnetic pulse, induced over voltage, and operating over voltage.
MDI surge protector is designed for HD networking camera with PTZ control, protecting power & network line from lightning electromagnetic pulse, induced over voltage, and operating over voltage.
Low insertion loss, fast response time, and low limiting voltage
Precise limiting voltage, large discharge current
High transmission rate, low bit error rate
PCB designed with micro-strip, high isolation and slight line disturbance
Monitor equipment(eg power, PTZ, camera) of surveillance system
Bank monitoring system
HD surveillance system of school, enterprise and road.
Model | MDI-2-12 | MDI-3-24 | MDI-3-220 |
Lightning projection zone(LPZ) | 2 | ||
Standards Compliance | IEC61000, EN60950 | ||
According to IEC61643 | III | ||
According to DIN VDE6075 Part6(Draft 11.89) A1,A2 | D | ||
Max continuous operating voltage Uc | Network:5V Network:5V Control:12V | ||
Nominal discharge current (8/20µs) In | 3KA | ||
Max discharge current Imax (8/21µs) Imax | 5KA | ||
Transmission rate | Network:1000Mbps Network:1000Mbps Control:10Mbps | ||
Limiting Voltage(10/700µs)component wire-Enclosure | Network:20V Network:20V control:40V | ||
Interface form | Network:RJ45 Power, Control: Clamped type | ||
Nominal working voltage(Un) | 12V | 24V | 220 |
Max continuous operation voltage(Uc) | 275V AC | ||
Nominal discharge current Imax(8/20µs) | 5kA | ||
Max discharge current Imax(8/20µs) | 10kA | ||
Load current | 0.5A | ||
Protection level Up ( In) | 60V | 100V | 900V |
Response time (Ta) | 25ns | ||
Mounting | Be Installed between protected equipment and signal line | ||
Working conditions | Clamped type | ||
Dimension | 88*68*40mm(No terminal) 88*68*38mm(No terminal and rail) | ||
Interface form | Clamped type | ||
Standards Compliance | IEC61643-1, EN60950,GB/T18802.21-2002,TB/T2311-2002, YD/T1235.2 | ||
IP code(IEC EN 60529) | IP20 | ||
Error rate | ≤10-12 | ||
Material/color | Aluminum/Blue | ||
Insertion loss | ≤.0.5dB | ||
Working conditions | Temperature: -40 to 85℃, Relative humidity: ≤95％ | ||
